Google

Edit File: ChangeLog.2003

2003-12-31 Scott James Remnant <scott@netsplit.com> * ltmain.sh: Infer tagged configuration for link mode with the full compiler arguments available rather than only the first. 2003-12-31 Alexandre Duret-Lutz <adl@gnu.org> * ltmain.sh: Quote $exec_cmd before it is eval'ed, so that libtool --mode=execute echo '4 * 5' does not expand the `*'. 2003-11-28 Peter O'Gorman <peter@pogma.com> * m4/libtool.m4: Move things around so that "setopt NO_GLOB_SUBST" to make zsh behave wrt \ escapes happens early in config.status. 2003-11-27 Gary V. Vaughan <gary@gnu.org> * libltdl/configure.ac: Removed. * configure.ac (AC_CONFIG_HEADERS): Merged from libltdl/configure.ac. (AC_LIB_LTDL): Ditto. (AC_CONFIG_FILES): Add libltdl/Makefile. (AC_CONFIG_SUBDIRS): Removed. (AC_CONFIG_COMMANDS): Remove generation of libltdl/ltmain.sh. * libltdl/Makefile.am (libtool): Removed references, since we now share $(top_builddir)/libtool. * NEWS: Updated. 2003-11-26 Gary V. Vaughan <gary@gnu.org> * Makefile.am (vcl.tmp): Be careful of VPATH builds. * Makefile.am (EXTRA_DIST): Add stamp-vcl, or we go back to a double configure run from a distributed tarball :-? 2003-11-26 Gary V. Vaughan <gary@gnu.org> Okay, the problem I am trying to solve is that when a change (say, bumping the version to 1.6 for the next release) is committed, the timestamp in ChangeLog is updated, but ltmain.sh and libtoolize inherit the pre-commit build number from config.status. This delta notes the change in build number in the unstamped ChangeLog and forces a rerun of configure etc. to roll a new ltmain.sh with the correct TIMESTAMP: * Makefile.am (stamp-vcl): We actually need a new config.status to force the correct timestamp into libtoolize and ltmain.sh, rerunning autoconf has no effect at all if configure.ac hasn't changed. 2003-11-26 Gary V. Vaughan <gary@gnu.org> * Makefile.am (stamp-vcl): New rules to force libtool and libtoolize scripts to update when the TIMESTAMP changes in ChangeLog, but the file modification time doesn't (e.g in cvs commit). Otherwise we'll carry on releasing tarballs with the wrong version numbers in the tools! * config/mkstamp: Change output format to ` $rev $date'. * configure.ac: Make the banner more like suggestions in http://www.gnu.org/prep/standards_toc.html Section 4.6. * libtoolize.in: Make --version output conform to the GNU standard. * ltmain.in: Ditto. And tweak the generated file headers to match. 2003-11-25 Gary V. Vaughan <gary@gnu.org> * Makefile.am (config.status): Removed. Rebuilding config.status isn't enough, because the TIMESTAMP in configure is still out of date. (configure): We actually need a new configure to force the correct timestamp into ltmain.sh. * Makefile.am (config/ltmain.sh): Removed. Rebuilding ltmain.sh isn't enough, because the TIMESTAMP in config.status is still out of date. (config.status): We actually need a new config.status to force the correct timestamp into ltmain.sh. * Makefile.am (config/ltmain.sh): Note the dependency on the timestamp in ChangeLog so we don't ship libtools that report the wrong version number :-/ * bootstrap: Explain automake and autoconf version dependencies truthfully, and the difference between bootstrap and user dependencies. * configure.ac (AM_INIT_AUTOMAKE): List AUTOMAKE_OPTIONS here. * Makefile.am, doc/Makefile.am, tests/Makefile.am (AUTOMAKE_OPTIONS): Removed from here. 2003-11-24 Gary V. Vaughan <gary@gnu.org> * tests/defs (func_configure): cdemo, demo and mdemo are shows signs of indeterminacy for some users. Be more verbose during failure to help track down the cause. 2003-11-22 Peter O'Gorman <peter@pogma.com> * ltmain.in: Check for module_cmds if max_cmd_len is exceeded too. * ltmain.in: Move eval to after command separation to allow ~ in paths. * tests/demo-hardcode.test: Call ./libtool not libtool. * ltmain.in: Test $old_striplib before using it, not $striplib. 2003-11-22 Gary V. Vaughan <gary@gnu.org> * configure.ac (LASTRELEASE): Calculate it as best as we can from AC_PACKAGE_VERSION. * Makefile.am (distdir): Remove dependency on timestamps so that it is possible to roll a dist without contacting the cvs server. Use `make cvs-release' for that. (cvs-news): Extracted from cvs-dist. (cvs-dist): Depend on cvs-news. (CHECK_LASTRELEASE): Check LASTRELEASE has been set. (prev-tarball): New rule. Use LASTRELEASE to make sure the previous release tarball is present. (cvs-diff): Use CHECK_LASTRELEASE. (xdelta): Ditto. (cvs-release): Depend on prev-tarball, timestamps, cvs-news and fetch. Provided you set LASTRELEASE appropriately, making a full cvs release is just a matter of `make cvs-release', and submitting the files to ftp-upload. 2003-11-19 Gary V. Vaughan <gary@gnu.org> * m4/libtool.m4 (_LT_PROG_LTMAIN): Ensure config.status has a value for `ac_aux_dir' when automake is not used. Reported by Patrick Welche <prlw1@newn.cam.ac.uk>. * configure.ac (AC_PREREQ): AS_HELP_STRING was introduced after autoconf-2.57 was released. 2003-11-18 Gary V. Vaughan <gary@gnu.org> * libltdl/ltdl.c (lt_dlhandle_find): New function to find a handle by module name. * libltdl/ltdl.h (lt_dlhandle_find): Declare it. * doc/libtool.texi (User defined module data): Document it. * NEWS: Updated. 2003-11-17 Gary V. Vaughan <gary@gnu.org> * m4/libtool.m4 (AC_LIBTOOL_SETUP): Uncomment call to _LT_CONFIG_COMMANDS. (_LT_AC_TAG_CONFIG, AC_LIBTOOL_CONFIG): Accumulate tag generation for `config.status' using _LT_CONFIG_SAVE_COMMANDS. Remove AC_MSG_NOTICE noise now that libtool is generated by a single config.status tag. * Makefile.am (libtool): Specify CONFIG_COMMANDS properly now that libtool is generated in one pass. * configure.ac (CONF_SUBDIRS): Make these relative to tests/Makefile.am. (DIST_MAKEFILE_LIST): Adjust to compensate for having removed the `tests/' part in CONF_SUBDIRS. * tests/Makefile.am (DIST_SUBDIRS): Distribute these directories. (SUBDIRS): Set to `.', a NOP, to workaround an automake bug which ignores DIST_SUBDIRS unless SUBDIRS is also set. * Makefile.am (DIST_SUBDIRS): Don't try to distribute the tests subdirectories from here, since the recursive automake dist rule only works with direct child directories. Defer to tests/Makefile.am in this case. 2003-11-15 Scott James Remnant <scott@netsplit.com> * ltmain.in: In compile mode, delay parsing of -shared, -static, -prefer-pic and -prefer-non-pic until after tagged configuration has been read. In link mode, read tagged configuration before parsing any arguments. These arguments will now work when using a non-C compiler. 2003-11-14 Gary V. Vaughan <gary@gnu.org> * NEWS: Mention AC_LIBTOOL_TAGS. * Makefile.am (EXTRA_DIST): List ChangeLog files correctly. * tests/cdemo/configure.ac, tests/demo/configure.ac, tests/depdemo/configure.ac, tests/f77demo/configure.ac, tests/mdemo/configure.ac, tests/mdemo2/configure.ac, tests/pdemo/configure.ac, tests/tagdemo/configure.ac: Declare just the tags we need using AC_LIBTOOL_TAGS, reducing the size of the configure script by 50% in most cases. 2003-11-14 Marius Vollmer <mvo@zagadka.de> * doc/libtool.texi (Libltdl interface): libltdl does in fact load dependency libs for lt_dlopen()ed modules. 2003-11-14 Gary V. Vaughan <gary@gnu.org> Run our configure.ac files through Autoconf 2.59's autoupdate, and then tweak the results by hand: * m4/libtool.m4 (AC_PROG_LD): In common with all the other AC_PROG_ macros, AC_SUBST the discovered LD. (AC_PROG_NM): Similarly for NM. (LT_AC_PROG_SED): Similarly for SED. * configure.ac: No need to SUBST NM and LD manually any more. (AC_PREREQ): Conservatively downgrade from 2.59 to 2.54. * tests/cdemo/configure.ac, tests/demo/configure.ac, tests/depdemo/configure.ac, tests/f77demo/configure.ac, tests/mdemo/configure.ac, tests/mdemo2/configure.ac, tests/pdemo/configure.ac, tests/tagdemo/configure.ac: Ditto. * m4/libtool.m4 (AM_PROG_LIBTOOL, AM_ENABLE_SHARED, AM_ENABLE_STATIC, AM_DISABLE_SHARED, AM_DISABLE_STATIC, AM_PROG_LD, AM_PROG_NM): AU_DEFUN these macros so autoupdate can use the newer definitions. 2003-11-12 Gary V. Vaughan <gary@gnu.org> The rules for uploading releases to gnu.org have been updated, and are in fact now rather complicated. This delta updates the release instructions to the describe the new process, and updates the maintainer rules to help automate many of the steps: * README-alpha: Updated release instructions. * Makefile.am (GPG): Name of the program for generating signatures for files to be uploaded. (XDELTA, XDELTA_OPTIONS): Invocation of xdelta. (cvs-dist): Run distcheck before tagging the cvs tree incase distcheck fails, and then generate the gpg signature files. (cvs-diff): Generate the gpg signature files for the diff. (xdelta): New rule for generating the xdelta diffs and associated gpg signature files. (cvs-release): New rule to do all of the above, if you don't mind typing your gpg passphrase over and over again. :-) (fetch): New rule inspired by automakes similar rule for updating files maintained outside the project. * config/config.guess, config/config.sub: Updated with the new fetch rule. 2003-11-11 Gary V. Vaughan <gary@gnu.org> * libltdl/ltdl.c (lt_dlinit): Save a function call for each loader added to the list, in exchange for appending loaders to the list with O(N) rather than O(1). The longest the loader list can ever get is 4 (on cygwin with dld installed) so it probably constitutes a small speedup, in addition to making the code much more readable. * m4/libtool.m4 (AC_LIBTOOL_SETUP): Don't define the value for ltmain unconditionally. (_LT_PROG_LTMAIN): New macro to ensure that the shell variable `ltmain' actually points at a suitable `ltmain.sh'. (_AC_PROG_LIBTOOL): Require it. (AC_LIBTOOL_CONFIG, _LT_AC_TAG_CONFIG): Invoke it. * Makefile.am (libtool): ltmain.sh is in the build tree. * libltdl/configure.ac: Ditto. 2003-11-10 Scott James Remnant <scott@netsplit.com> * ltmain.in: Add -pthread and similar to $deplibs ($compile_deplibs and $finalize_deplibs for programs) when found on the command line or in a .la file's dependency_libs (but don't place them there) so they are honoured when linking both programs and libraries. 2003-11-10 Scott James Remnant <scott@netsplit.com> * m4/libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER) [linux]: Include directories found in /etc/ld.so.conf in sys_lib_dlsearch_path_spec. 2003-11-09 Peter O'Gorman <peter@pogma.com> * ltmain.in (linkalldeplibs,darwin): Fix a bug reported by Idar Tollefsen where a dir could be added to the link line with no '-L' on darwin. 2003-11-07 Gary V. Vaughan <gary@gnu.org> * tests/cdemo/configure.ac, tests/demo/configure.ac, tests/depdemo/configure.ac, tests/f77demo/configure.ac, tests/mdemo/configure.ac, tests/mdemo2/configure.ac, tests/pdemo/configure.ac, tests/tagdemo/configure.ac: s/AM_PROG_LIBTOOL/AC_PROG_LIBTOOL/. Marching boldly into the 21th century :-$ * m4/libtool.m4 (AC_LIBTOOL_TAGS, AC_ENABLE_SHARED, AC_DISABLE_SHARED, AC_ENABLE_STATIC, AC_DISABLE_STATIC, AC_ENABLE_FAST_INSTALL, AC_DISABLE_FAST_INSTALL, AM_PROG_LIBTOOL, AM_ENABLE_SHARED, AM_ENABLE_STATIC, AM_DISABLE_SHARED, AM_DISABLE_STATIC): These macros must be AC_DEFUNed after all, otherwise aclocal can't find them when it tries to construct `aclocal.m4'. * Makefile.am (install-data-local): Wipe out old installation pkgdatadir before installing new files. * NEWS: Updated. * libtoolize.in (func_scan_files): If libtoolize is run before automake has created install-sh and configure.ac does not mention AC_CONFIG_AUX_DIR, fall back to the current directory for auxdir. 2003-11-07 Robert Millan <zeratul2@wanadoo.es> * m4/libtool.m4 (AC_DEPLIBS_CHECK_METHOD) [GNU/KNetBSD]: Detect inter-library dependencies. 2003-11-06 Gary V. Vaughan <gary@gnu.org> * m4/libtool.m4 (_LT_AC_FILE_LTDLL_C): Removed; no longer in use. * m4/libtool.m4: s/ifelse(/m4_if(/g (_LT_AC_SYS_LIBPATH_AIX, _LT_AC_SHELL_INIT, _LT_AC_PROG_ECHO_BACKSLASH, AC_LIBTOOL_LINKER_OPTION, AC_LIBTOOL_TAGS, _LT_AC_TAG_CHECK, _LT_AC_TAG_CONFIG, AC_ENABLE_SHARED, AC_DISABLE_SHARED, AC_ENABLE_STATIC, AC_DISABLE_STATIC, AC_ENABLE_FAST_INSTALL, AC_DISABLE_FAST_INSTALL, _LT_AC_LANG_C_CONFIG, _LT_AC_LANG_GCJ_CONFIG, _LT_AC_LANG_RC_CONFIG, AC_LIBTOOL_CONFIG, _LT_AC_TAGVAR, AM_PROG_LIBTOOL, AM_ENABLE_SHARED, AM_ENABLE_STATIC, AM_DISABLE_SHARED, AM_DISABLE_STATIC): Use m4_define instead of AC_DEFUN for internal macros that do not AC_PROVIDE or AC_REQUIRE, and documented user macros that cannot be AC_REQUIREd because they need arguments, or because that would violate the documented API. * m4/libtool.m4 (AC_LIBTOOL_SETUP): Add a new delay_single_quote_subst sed script to quote single quotes in variables that are copied to `config.status'. (_LT_CONFIG_STATUS_DECLARE): New macro to apply delay_single_quote_subst to a named variable. (AC_LIBTOOL_CONFIG): Use _LT_CONFIG_STATUS_DECLARE to declare all `configure' variables that are copied to `config.status'. (AC_LIBTOOL_PROG_COMPILER_PIC): Fix a quoting bug exposed by _LT_CONFIG_STATUS_DECLARE using the null quadrigraph in the rvalues of lt_prog_compiler_pic. 2003-11-06 Owen Taylor <otaylor@redhat.com> * m4/libtool.m4 (AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE): Recognise the 'R' symbol type so read-only symbols can be exported when combining GCC and Solaris LD. 2003-11-06 James Henstridge <james@daa.com.au>, Scott James Remnant <scott@netsplit.com> * m4/libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) [Linux]: Fix the -export-symbols and -export-symbols-regex options. 2003-11-06 Scott James Remnant <scott@netsplit.com> * tests/demo-nopic.test: Skip test on hppa, which don't like non-PIC shared libraries. 2003-11-06 Charles Wilson <cwilson@ece.gatech.edu> * tests/depdemo/configure.ac, tests/mdemo/configure.ac, tests/mdemo2/configure.ac: process 'libtool --features' from Makefile, not configure -- because libtool doesn't exist at configure time. * ltmain.in (find_executable, check_executable) [cygwin*, mingw*]: binary wrapper used with uninstalled executables breaks when invoked via execlp/execvp (that is, via $PATH). Handle that case. (fnqualify): Subsumed into find_executable. * m4/libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) [cygwin*, mingw*]: when extracting symbols from an import lib (occurs if --enable-shared --disable-static), the output of $global_symbol_pipe is not the same as when extracting from a static library (the default case). Add extra filters to $export_symbols_cmds to process this sort of output in addition to 'normal' static-lib output. * NEWS: Updated. 2003-11-06 Charles Wilson <cwilson@ece.gatech.edu>, Gary V. Vaughan <gary@gnu.org> * libltdl/ltdl.c (LT_USE_POSIX_DIRENT): Factored out. (LT_USE_WINDOWS_DIRENT_EMULATION): Move to after include "ltdl.h", as they are affected by __WINDOWS__ definition. (LT_READTEXT_MODE): Use textmode to read .la files. (lt_dlinit): Use LoadLibrary loader as a fallback on cygwin. 2003-11-06 Gary V. Vaughan <gary@gnu.org> * libltdl/ltdl.h (__WINDOWS__): Define this if _WIN32 or WIN32 are defined, unless __CYGWIN__ or __CYGWIN32__ are defined. (LT_SCOPE): Now set without reference to __CYGWIN__ definition, since __WINDOWS__ now implies !__CYGWIN__ after canonicalisation. (LT_PARAMS, lt_ptr): Use canonicalised __WINDOWS__ to determine which values to set these macros to. 2003-11-05 Gary V. Vaughan <gary@gnu.org> * README-alpha: Mention autotools-announce@gnu.org, and update release note templates. 2003-11-01 Scott James Remnant <scott@netsplit.com> * ltmain.in: When relinking, place the -L parameter containing the installation prefix directory after the intended destination, so we don't accidentally link against an older installed library. 2003-11-01 Peter O'Gorman <peter@pogma.com> * tests/mdemo2/Makefile.am: Let mdemo2 find ltdl.h again. 2003-10-30 Peter O'Gorman <peter@pogma.com> * m4/libtool.m4 (Darwin): Fix stupidities for darwin tags support. Makes it work again if AC_LIBTOOL_TAGS is specified in configure.ac. Bug reported by Joe Orton and Christian Schaffner. 2003-10-21 Gary V. Vaughan <gary@gnu.org> Start to eliminate the double run of configure in a fresh CVS checkout by generating ltmain.sh, using that to create libtool, and then adding the tags to that, all from config.status. * configure.ac (AC_CONFIG_FILES): Make config/ltmain.sh, and copy it to libltdl. * Makefile.am ($(srcdir)/config/ltmain.sh): This file is now created by config.status. Adjust this rule. (libtoolize): Set CONFIG_COMMANDS to empty to prevent regenerating the libtool script as a side effect of running this rule. * libtool.m4: Bump serial number. Fix comment typos. (_LT_CONFIG_LIBTOOL_INIT, _LT_CONFIG_LIBTOOL, _LT_CONFIG_SAVE_COMMANDS, _LT_CONFIG_COMMANDS: New macros. They don't work for some reason - the variable value quoting in the init section is all wrong. Not used at the moment. (AC_LIBTOOL_CONFIG): Generate libtool from config.status. (_LT_AC_TAG_CONFIG): Add the tags in config.status. (compiler_DEFAULT): Save the compiler value for the DEFAULT tag, or it gets overwritten by the other macros. (EOF): Globally replace with _LT_EOF to avoid namespace pollution. * tests/demo/configure.ac (STATIC): Check $enable_static instead of running ./libtool which doesn't exist yet. (BINARY_HELLDL): Check $lt_cv_sys_global_symbol_pipe with case instead of grepping ./libtool which doesn't exist yet. * tests/pdemo/configure.ac (STATIC, BINARY_HELLDL): Ditto. * doc/libtool.texi (AC_PROG_LIBTOOL): Add some notes about trying to get config details from `libtool --config'. * NEWS: Updated. 2003-10-21 Gary V. Vaughan <gary@gnu.org> * ChangeLog, ChangeLog.0, ChangeLog.1: Refactored... * ChangeLog, ChangeLog.2002, ChangeLog.2001, ChangeLog.2000, ChangeLog.1999, ChangeLog.1998, ChangeLog.1997, ChangeLog.1996: ...into entries by year for easier copyright confirmation. * configure.ac, libltdl/configure.ac, tests/cdemo/configure.ac, tests/demo/configure.ac, tests/depdemo/configure.ac, tests/f77demo/configure.ac, tests/mdemo/configure.ac, tests/mdemo2/configure.ac, tests/pdemo/configure.ac, tests/tagdemo/configure.ac (AM_INIT_AUTOMAKE): Remove redundant arguments. * libltdl/configure.ac: Use quadrigraphs to escape macronames. * bootstrap (reconfdirs): Same as yesterday, only with portable bourne shell syntax. :-/ 2003-10-20 Gary V. Vaughan <gary@gnu.org> * bootstrap (reconfdirs): Overridable top dirs for bootstrap, for those times when you don't want to wait for all of the test directories to be rebootstrapped! 2003-10-19 Kevin P. Fleming <kpfleming@backtobasicsmgmt.com> Charles Wilson <cygwin@cwilson.fastmail.fm> * ltmain.in: include --tag options, if specified, in the relink_command in uninstalled .la files. Also, preserve --silent, --debug options when libtool re-execs itself. * NEWS: Updated. 2003-10-19 Charles Wilson <cygwin@cwilson.fastmail.fm> * libtoolize.in: protect sed expression against AC_CONFIG_AUX_DIR_DEFAULT. 2003-10-16 Bob Friesenhahn <bfriesen@simple.dallas.tx.us> * m4/libtool.m4 (AC_DEPLIBS_CHECK_METHOD): For MinGW, reverted DLL check method back to a working objdump-based test. This is not as concrete a test as using the 'file' command, but it does not require that the 'file' command be available. 2003-10-15 Bob Friesenhahn <bfriesen@simple.dallas.tx.us> * doc/libtool.texi (AC_LIBTOOL_TAGS): Incorporate documentation for AC_LIBTOOL_TAGS macro to specifify libtool tags. The now defunct --with-tags option was never documented. 2003-10-15 Albert Chin-A-Young <china@thewrittenword.com> * m4/libtool.m4: Restrict the list of tags that can be created with a new AC_LIBTOOL_TAGS([tag1 tag2 ...]) macro. Deprecate --with-tags. 2003-10-15 Gary V. Vaughan <gary@gnu.org> * libtoolize.in: Typo when copying config.sub. From Patrick Welche <prlw1@newn.cam.ac.uk> * demo/Makefile.am (libhell0_a_SOURCES): Do not name sources already built with libtool... (libhell0_a_LIBADD): ...instead name the objects directly. This prevents a long standing warning from automake 1.7+. * pdemo/Makefile.am (libhell0_a_SOURCES, libhell0_a_LIBADD): Ditto. * bootstrap: Make the fake files valid shell scripts with a comment incase they get left around. (LIBTOOLIZE): Use a dummy script to prevent the installed `libtoolize' from trashing the distributed libtool.m4, config.guess and config.sub. * configure.ac (AC_CONFIG_TESTDIR, AC_CONFIG_TESTFILES): Comment this out for now, the autotest testsuite rewrite is not ready yet. * tests/cdemo/Makefile.am, tests/demo/Makefile.am, tests/depdemo/Makefile.am, tests/f77demo/Makefile.am, tests/mdemo/Makefile.am, tests/mdemo2/Makefile.am, tests/pdemo/Makefile.am, tests/tagdemo/Makefile.am (top_distdir): Removed. `autoreconf' needs literals in ACLOCAL_AMFLAGS. 2003-10-14 Gary V. Vaughan <gary@gnu.org> * libtoolize.in (func_mkdir_p): Synch with tests/defs; if there are no more directories in the stack, break out of the loop. * tests/Makefile.am (COMMON_TESTS): Remove pdemo-unst.test, which isn't a real test. 2003-10-14 Gary V. Vaughan <gary@gnu.org> Refactor all the test case common code into shell functions in tests/defs, and move the various demo directories out of $top_srcdir, and into tests too. The refactoring showed up a number of inconsistencies and latent bugs, as well as fixing (I think!!) the long-standing annoyance with some of the tests giving spurious failures intermittently. While I was here, emacs kindly removed a lot of bogus whitespace and added copyright notices for us: * cdemo, demo, depdemo, f77demo, mdemo, mdemo2, pdemo, tagdemo: Moved from here... * tests/cdemo, tests/demo, tests/depdemo, tests/f77demo, tests/mdemo, tests/mdemo2, tests/pdemo, tests/tagdemo: ...to here. * tests/defs: Factor much common functionality from the test scripts into shell functions. Added a copyright notice. * tests/assign.test, tests/cdemo-conf.test, tests/cdemo-exec.test, tests/cdemo-make.test, tests/cdemo-shared.test, tests/cdemo-static.test, tests/demo-conf.test, tests/demo-deplibs.test, tests/demo-exec.test, tests/demo-inst.test, tests/demo-make.test, tests/demo-nofast.test, tests/demo-nopic.test, tests/demo-pic.test, tests/demo-shared.test, tests/demo-static.test, tests/demo-unst.test, tests/depdemo-conf.test, tests/depdemo-exec.test, tests/depdemo-inst.test, tests/depdemo-make.test, tests/depdemo-nofast.test, tests/depdemo-shared.test, tests/depdemo-static.test, tests/depdemo-unst.test, tests/f77demo-conf.test, tests/f77demo-exec.test, tests/f77demo-make.test, tests/f77demo-shared.test, tests/f77demo-static.test, tests/link-2.test, tests/link.test, tests/mdemo-conf.test, tests/mdemo-exec.test, tests/mdemo-inst.test, tests/mdemo-make.test, tests/mdemo-shared.test, tests/mdemo-static.test, tests/mdemo-unst.test, tests/mdemo2-conf.test, tests/mdemo2-exec.test, tests/mdemo2-make.test, tests/nomode.test, tests/pdemo-conf.test, tests/pdemo-exec.test, tests/pdemo-inst.test, tests/pdemo-make.test, tests/pdemo-unst.test, tests/quote.test, tests/sh.test, tests/suffix.test, tests/tagdemo-conf.test, tests/tagdemo-exec.test, tests/tagdemo-make.test, tests/tagdemo-shared.test, tests/tagdemo-static.test: Refactored to use new functions in tests/defs. Added a copyright notice. * tests/hardcode.test, noinst-link.test, tests/relink.test, tests/relink.test, tests/mdryrun.test: Ditto. Moved from here... * tests/demo-hardcode.test, demo-noinst-link.test, tests/demo-relink.test, tests/depdemo-relink.test, tests/mdemo-dryrun.test: ...to here respectively. * Makefile.am: Added a copyright notice. * tests/sh.test: Check libtoolize.in for non-portabilities too. * libtoolize.in: Fix non-portabilities found by tests/sh.test. 2003-10-12 Peter O'Gorman <peter@pogma.com> * m4/libtool.m4: Speed up max_cmd_len check. 2003-10-08 Gary V. Vaughan <gary@gnu.org> * libtoolize.in: AC_CONFIG_M4_DIR has landed in CVS autoconf. Only it's called AC_CONFIG_MACRO_DIR. Search and replace. Grumble. ;-) 2003-10-08 Scott James Remnant <scott@netsplit.com> * libltdl/ltdl.c (lt_dlerror): change return value when no error has occured to NULL to match documentation. (Debian Bug #157229) 2003-10-07 Gary V. Vaughan <gary@gnu.org> * ltmain.in: Don't suppress output of PIC mode compile if -no-suppress option is given. * doc/libtool.texi (Invoking libtool): Document it. * NEWS: Updated. 2003-10-07 Marcus Comstedt <marcus@mc.pp.se> * m4/libtool.m4 [amigaos-ppc, amigaos-m68k]: Differentiate between amigaos on ppc and m68k. * NEWS: Updated. 2003-10-07 Ralph Schleicher <rs@nunatak.allgaeu.org> * ltmain.in: Do not create `.o' objects when `-shared' is specified in compile mode. Do not make a static library when `-shared' is specified in link mode. * doc/libtool.texi (Compile mode): Document it. * NEWS: Updated. * doc/libtool.texi (Compile mode): Be more specific about the effect of `-static'. * ltmain.in: Do not create `.lo' objects when `-static' is specified. * NEWS: Updated. 2003-10-07 Gary V. Vaughan <gary@gnu.org> * doc/libtool.texi (Invoking libtool): Updated. * ltmain.in: Add missing clean and finish modes to the shorthand options. * ltmain.in: Typo in the --mode shorthand. 2003-10-07 Scott James Remnant <scott@netsplit.com> * m4/libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Remove dead code for platforms that have been using pass_all for some time now. 2003-10-07 Gary V. Vaughan <gary@gnu.org> * libtoolize.in: Completely rewritten. * Makefile.am (AUTOMAKE_OPTIONS): Reduced to 1.7. The 1.8 requirement just made the distribution much smaller due to m4_includes. 1.7 will bootstrap libtool just fine. * NEWS: Updated. 2003-10-05 Peter O'Gorman <peter@pogma.com>, Gary V. Vaughan <gary@gnu.org> * ltmain.in: Remove inferrence of mode, add shorthand for mode choice. * ltmain.in: Specifying -allow-undefined is now an error. 2003-09-29 Scott James Remnant <scott@netsplit.com> * m4/libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Use pass_all for linux* solving many build problems on ARM, and hopefully preventing any future ones. (Debian Bug #191133 and #190569) 2003-09-29 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>, Dalibor Topic <robilad@kaffe.org> * libltdl/ltdl.c: Only include malloc.h if stdlib.h can not be found. 2003-09-26 Alfred M. Szmidt <ams@kemisten.nu> * mdemo2/Makefile.am (INCLUDES): Include `$(top_srcdir)/../libltdl' instead of `../libltdl'. 2003-09-24 Gary V. Vaughan <gary@gnu.org> * bootstrap: Rewritten to use autoreconf. * config.guess, config.sub, mkstamp: Moved from here... * config/config.guess, config/config.sub, config/mkstamp: ...to here, respectively. * libtool.m4, ltdl.m4: Moved from here... * m4/libtool.m4, m4/ltdl.m4: ...to here, respectively. * configure.ac: Removed various acinclude.m4 hackery, as these files are no longer needed with automake 1.8. * Makefile.am: Removed various acinclude.m4 hackery, as these files are no longer needed with automake 1.8. (AUTOMAKE_OPTIONS): Require CVS automake. (CONF_SUBDIRS, CFLAGS, CPPFLAGS, LDFLAGS, LIBS, FFLAGS, FLIBS): Automake now makes a Make variable from every AC_SUBST, so these are NOP. (aclocal_macros): These files are now in their own m4 subdir. Changed all clients. (EXTRA_DIST): mkstamp has moved to the new config subdir. Changed all clients. (pkgdata_SCRIPTS): Ditto wrt config.guess and config.sub. (pkgdata_DATA): Ditto wrt ltmain.sh. * f77demo/configure.ac, libltdl/configure.ac (AM_CONFIG_HEADER): Is deprecated in favour of AC_CONFIG_HEADERS. Updated to the latter. * Makefile.am, cdemo/Makefile.am, demo/Makefile.am, depdemo/Makefile.am, f77demo/Makefile.am, mdemo/Makefile.am, mdemo2/Makefile.am, pdemo/Makefile.am, tagdemo/Makefile.am (EXTRA_DIST): Remove acinclude.m4. (ACLOCAL_AMFLAGS): Search new `m4' macro directory. * configure.ac, cdemo/configure.ac, demo/configure.ac, depdemo/configure.ac, f77demo/configure.ac, mdemo/configure.ac, mdemo2/configure.ac, pdemo/configure.ac, tagdemo/configure.ac (AC_CONFIG_AUX_DIR): Declare that config helper scripts are now kept in the new config subdir. * libltdl/configure.ac (AC_CONFIG_AUX_DIR): Removed. Defaults to `.' anyway. 2003-09-21 Robert Millan <robertmh@gnu.org> * libtool.m4: Add GNU/KNetBSD support. * ltdl.m4: Likewise. 2003-09-13 Scott James Remnant <scott@netsplit.com> * libtool.m4: allow STRIP to contain spaces and additional arguments. (Debian Bug #183055) * ltmain.in: include newline in "sensible default" for IFS. (Debian Bug #98492 and #95447) 2003-09-11 Peter O'Gorman <peter@pogma.com> * AUTHORS, THANKS: Added myself to AUTHORS, removed from THANKS. 2003-09-10 Peter O'Gorman <peter@pogma.com> * mdemo2/configure.ac: Use AC_LIBTOOL_DLOPEN. * mdemo2/main.c: Use LTDL_SET_PRELOADED_SYMBOLS(). * mdemo2/Makefile.am: Set INCLUDES properly and add -dlopen force to make sure the symbols file is included in the link line. * ltmain.in: Accept -framework for darwin and put it in dependency_libs. For non-installed .la's try to avoid having ./.libs/.libs/libfoo.so on the link line. 2003-09-10 Arne Woerner <woerner@mediabase-gmbh.de> * libtool.m4 [openbsd]: openbsd 3.x needs versioning information. 2003-08-29 Gary V. Vaughan <gary@gnu.org> * bootstrap: Typo. 2003-08-29 Alexandre Duret-Lutz <adl@gnu.org> * libtool.m4 (_LT_AC_LANG_C_CONFIG): Fix unquoted call to _LT_AC_LANG_C_CONFIG. (AC_PROG_EGREP): Remove, now that Libtool requires Autoconf 2.56. * bootstrap: Issue an upgrade warning. 2003-08-27 Gary V. Vaughan <gary@gnu.org> * libtool.m4 (_LT_AC_CHECK_DLFCN): Use the interrim new AC_CHECK_HEADER with compiler rather than preprocessor. (AC_LIBTOOL_SETUP): ...which was introduced in autoconf-2.56, so we AC_PREREQ that version. * ltdl.m4 (AC_WITH_LTDL, AC_LIB_LTDL, AC_LTDL_FUNC_ARGZ): Ditto. 2003-08-27 Gary V. Vaughan <gary@gnu.org> Work around a bug in AU_ALIAS in CVS Autoconf that inserts a newline just before AC_FD_CC, by hand updating: * ltdl.m4 (AC_LTDL_SYMBOL_USCORE): s/AC_FD_CC/AS_MESSAGE_LOG_FD/g. 2003-08-05 Jim Pick <jim@kaffe.org>, Ito Kazumitsu <kaz@maczuka.gcd.org>, Gary V. Vaughan <gary@gnu.org> Much as we have tried not to make it the callers' responsibility to maintain an lt_dlrealloc function pointer, it is too difficult to implement realloc as malloc/memcpy/free without knowing the size of the original block. rpl_realloc has been deprecated since 2002-10-30, but kaffe has real failures with that so it's time to bite the bullet. Caller gets to maintain lt_dlrealloc: * NEWS (1.5.1): Updated. * libltdl/ltdl.c (LT_DLREALLOC): Use lt_dlrealloc so the user can update the function pointer to match lt_dlmalloc. (lt_emalloc): Use lt_dlrealloc rather than hardcoding realloc. * doc/libtool.texi (Libltdl interface): Describe lt_dlrealloc now that it too has become part of the exported interface to libltdl. 2003-08-01 Peter O'Gorman <peter@pogma.com> * libtool.m4 (darwin): Use "-undefined dynamic_lookup" if the user set MACOSX_DEPLOYMENT_TARGET to 10.3 or greater. * libltdl/ltdl.c (dyld): Save the error from the first lookup to report in lt_dlerror(). Otherwise the error is always "Symbol _foo not in /usr/lib/libSystem.dylib". Thanks to Chris Zubrzycki for reporting this. 2003-08-01 Robert Boehne <rboehne@gnu.org> * libltdl/ltdl.h: Tweak the header to support visual studio. 2003-07-31 Greg Eisenhauer <eisen@cc.gatech.edu> * ltmain.in: Provide absolute paths for dlopen and dlpreopen files in generating uninstalled libtool libraries. * mdemo2/main.c, mdemo2/Makefile.am, mdemo2/README, mdemo2/configure.ac, mdemo2/.cvsignore, mdemo/mlib.c, tests/mdemo2-conf.test, tests/mdemo2-exec.test, tests/mdemo2-make.test: New files for testing above feature. * configure.ac, bootstrap, tests/Makefile.am: Accomodate new test directory. * mdemo/Makefile.am: Build libmlib.la for mdemo2 tests. 2003-07-30 Tony Wyatt <wyattaw@optushome.com.au> * libtool.m4: Remove parentheses around finish_eval part which broke on amigaos pdksh. 2003-07-30 Christiaan Welvaart <cjw@daneel.dyndns.org> * tests/dryrun.test: Ignore any 'total' line from "ls -l" output. 2003-07-30 Albert Chin-A-Young <china@thewrittenword.com> * libtool.m4 (AC_LIBTOOL_PROG_CC_C_O): Correctly remove IRIX C++ template files. 2003-07-24 Robert Millan <robertmh@gnu.org> * libtool.m4: More fixes for the new GNU/FreeBSD triplet. 2003-07-14 Bob Friesenhahn <bfriesen@simple.dallas.tx.us> * config.guess, config.sub: Synchronized from ftp.gnu.org since Robert Millan's patch requires it. 2003-07-14 Robert Millan <zeratul2@wanadoo.es> * libtool.m4: Fixed to use the new GNU/FreeBSD triplet. * ltdl.m4: Fixed to use the new GNU/FreeBSD triplet. * ltmain.in: Remove GNU/FreeBSD cases, which are no longer needed. 2003-07-14 Andreas Schwab <schwab@suse.de> * libtool.m4 (_LT_AC_LOCK): Also match powerpc64-*linux* in addition to ppc64-*linux*. From Markus Meissner <meissner@bogus.example.com>. 2003-07-14 Dalibor Topic <robilad@yahoo.com> * libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): For AmigaOS with pdksh, set the maximum command line length to 8K since otherwise the test takes over an hour to run. 2003-06-25 Alexandre Oliva <aoliva@redhat.com>, Tim Waugh <twaugh@redhat.com> * libtool.m4: Replace mis-uses of path with pathname. (AC_PROG_LD_GNU): Don't quote $LD when running it. (_LT_AC_LANG_CXX_CONFIG): Use -nostdlib also when linking with g++ and non-GNU ld. 2003-06-11 Gary V. Vaughan <gary@gnu.org> * libtool.m4 (AC_LIBTOOL_COMPILER_OPTION): Require LT_AC_PROG_SED to ensure $SED is set by the time it is used. * ChangeLog: Restore missing entries from 2003-04-22. * NEWS: Sychronised from branch-1-5. 2003-06-03 Benjamin Reed <ranger@befunk.com> * ltmain.in: search libraries in the order of preference, rather than picking .la's even if they're in a less preferred directory. 2003-06-03 Robert Millan <rmh@debian.org> * ltdl.m4: Add support for GNU/FreeBSD. * ltmain.in: Add support for GNU/FreeBSD. 2003-06-03 Albert Chin-A-Young <china@thewrittenword.com> * libtool.m4: No need to use sed to remove leading comma when appending to $tagnames. 2003-06-03 Albert Chin-A-Young <china@thewrittenword.com> * tests/defs, tests/demo-conf.test, tests/demo-nofast.test, tests/demo-nopic.test, tests/demo-pic.test, tests/demo-shared.test, tests/demo-static.test, tests/depdemo-conf.test, tests/depdemo-nofast.test, tests/depdemo-shared.test, tests/depdemo-static.test: Pass build system type to tests to support environment where default system type not equal to build system type (eg. 64-bit HP-UX). 2003-06-03 Peter O'Gorman <peter@pogma.com> * libtool.m4 (darwin): Remove checks for Apple-specific gcc. * libltdl/ltdl.c (HAVE_MACH_O_DYLD_H): #define __private_extern__ for fsf gcc. * ltmain.in (darwin): Only add new paths to newlib_search_path. 2003-06-03 Max Bowsher <maxb@ukf.net> * libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Reorder cygwin's system library search path. 2003-06-01 Robert Boehne <rboehne@gnu.org> * libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Match all qnx-nto as recent config.guess returns a slightly different string. * ltmain.in: Replace use of "od" with tr. 2003-05-30 Gary V. Vaughan <gary@gnu.org> * libltdl/ltdl.c (argz_insert): Corrected an off by one error when checking that before is not out of range. 2003-05-29 Gary V. Vaughan <gary@gnu.org> * libltdl/ltdl.c (lt_int_dyld_lib_install_name): Removed unused variable mh1. (sys_dyld_close): Removed unused variable size. 2003-05-21 Bruno Haible <bruno@clisp.org> * libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Add support for GNU/FreeBSD. 2003-04-22 Alexandre Oliva <aoliva@redhat.com> * libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on all mips*-linux* variants. 2003-04-22 Samuel Meder <meder@mcs.anl.gov> * libtool.m4 Switch on $CC and add paterns to cases. 2003-04-22 Peter O'Gorman <peter@pogma.com> * libtool.m4: Move the AC_LIBTOOL_SYS_DYNAMIC_LINKER check to be before AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH, becuase the value of shlibpath_overrides_runpath is used in the HARDCODE test and is set in the DYNAMIC_LINKER test. * ltmain.in [darwin]: We never need to relink on darwin. 2003-04-22 Samuel Meder <meder@mcs.anl.gov> * libtool.m4: Switch on $CC and add patterns to cases. 2003-04-21 Richard Dawe <rich@phekda.freeserve.co.uk> * doc/libtool.texi: Use @ifnottex instead of @ifinfo, to allow production of HTML documentation using makeinfo. 2003-04-14 Robert Boehne <rboehne@gnu.org> * NEWS: Updated. * configure.ac: Bumped version to 1.5a. GNU libtool 1.5 was released. * configure.ac: Bumped version to 1.5. * NEWS: updated. * README-alpha: Updated upload instructions. * README: Changed typo in version description. * config.guess, config.sub, texinfo.tex: Synchronized from ftp.gnu.org. 2003-04-10 Alexandre Oliva <aoliva@redhat.com> * libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on all mips*-linux* variants. 2003-04-09 Samuel Meder <meder@mcs.anl.gov> * libtool.m4 Switch on $CC and add paterns to cases. 2003-04-09 Peter O'Gorman <peter@pogma.com> * libtool.m4: Move the AC_LIBTOOL_SYS_DYNAMIC_LINKER check to be before AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH, becuase the value of shlibpath_overrides_runpath is used in the HARDCODE test and is set in the DYNAMIC_LINKER test. * ltmain.in(darwin): We never need to relink on darwin. 2003-04-09 Samuel Meder <meder@mcs.anl.gov> * libtool.m4 Switch on `basename $CC` not $CC 2003-04-05 Peter O'Gorman <peter@pogma.com> * libtool.m4: if ZSH_VERSION is set then setopt NO_GLOB_SUBST so libtool works. Remove zsh echo test code, don't bother checking for zsh anymore in the darwin archive_expsym_cmds. 2003-04-05 Allan Sandfeld Jensen <snowwolf@one2one-networks.com> * libtool.m4: Switch on $CC not $cc_basename. 2003-04-02 Robert Boehne <rboehne@gnu.org> * tests/defs: Quote $DJGPP to prevent problems with some shells. Pointed out by Albert Chin <libtool@thewrittenword.com> 2003-04-01 Peter O'Gorman <peter@pogma.com> * libtool.m4: Fix the echo test which I broke earlier. * ltmain.in: Make DESTDIR work on darwin, don't use otool. 2003-03-31 Keith Packard <keithp@keithp.com> * ltmain.in: New flag -version-number to be used for maintaining compatability with a previously non-Libtool versioning scheme. * doc/libtool.texi: Document it. 2003-03-31 Naofumi Yasufuku <naofumi@yasufuku.net> * ltmain.in (win32_libid): Fixed sed expression error in win32_nmres evaluation. 2003-03-31 Albert Chin <libtool@thewrittenword.com> * ltmain.in: Don't pass -R flags found in a .la's dependency_libs variable directly down to the linker. Reported by Tim Mooney <mooney@dogbert.cc.ndsu.nodak.edu>. 2003-03-28 Richard Dawe <rich@phekda.freeserve.co.uk> * Makefile.am: Define CONF_SUBDIRS. * tests/defs: Set CONFIG_SITE to /nonexistent, except on DJGPP, which requires its config.site, to work correctly. * tests/cdemo-conf.test, tests/cdemo-shared.test, tests/cdemo-static.test, tests/demo-conf.test, tests/demo-nofast.test, tests/demo-nopic.test, tests/demo-pic.test, tests/demo-shared.test, tests/demo-static.test, tests/depdemo-conf.test, tests/depdemo-nofast.test, tests/depdemo-shared.test, tests/depdemo-static.test, tests/f77demo-conf.test, tests/f77demo-shared.test, tests/f77demo-static.test, tests/mdemo-conf.test, tests/mdemo-shared.test, tests/mdemo-static.test, tests/pdemo-conf.test, tests/tagdemo-conf.test, tests/tagdemo-shared.test, tests/tagdemo-static.test: Don't set CONFIG_SITE, now that tests/defs sets it. * tests/cdemo-exec.test, tests/demo-exec.test, tests/demo-inst.test, tests/depdemo-exec.test, tests/depdemo-inst.test, tests/f77demo-exec.test, tests/mdemo-exec.test, tests/mdemo-inst.test, tests/pdemo-exec.test, tests/pdemo-inst.test, tests/tagdemo-exec.test: When checking for the existence of executables, use the executable file extension from $EXEEXT. 2003-03-28 Peter O'Gorman <peter@pogma.com> * libltdl/ltdl.c (dyld): Remove some debug printf's, fix a bug. * ltmain.in (darwin): Only link against shared libraries when doing link_all_deplibs. 2003-03-25 Robert Boehne <rboehne@gnu.org> * bootstrap: Add f77demo to the directories that AUTOHEADER is run in. 2003-03-21 Wesley W. Terpstra <terpstra@ito.tu-darmstadt.de> * ltmain.in: Don't accumulate directory information in clean mode. Include properly pathed wrapper script. 2003-03-21 Peter O'Gorman <peter@pogma.com> * README: Remove "Important" information about patching automake. * configure.ac: Fix misapplied patch in last commit * libtool.m4 (darwin): Check compiler is apple gcc, add -single_module support so that dyloading c++ shared libraries will work. * libtool.m4 (_LT_AC_TAGCONFIG): Add test -n to the tests so that it will work outside of libtool. * doc/PLATFORMS: Add darwin * f77demo/configure.ac: Add config.h which was misapplied previously. 2003-03-20 Peter O'Gorman <peter@pogma.com> * ltmain.in: Always use $echo not echo for consistency. Changes for darwin building. Warn if linking against libs linked with -module. Use module_cmds if available and building a module, move convenience double lib check, * libltdl/ltdl.c: ltdl support for darwin (first blush) * libltdl/README: note that darwin is supported * ltdl.m4: Changes for darwin, and for new shrext * libtool.m4: Changed the way darwin builds stuff (make check passes) added module_cmds, module_expsym_cmds and hardcode_automatic and put them in the libtool script. check for zsh's removal of escapes. Allow libraries to be stripped on darwin. * TODO: Remove the todo about zsh's removal of excapes. note that zsh echo works perfectly well, eval is screwed up. Seems to be fixed in latest zsh. * THANKS: added self :) * f77demo/configure.ac: Use config.h or it doesn't work. 2003-03-19 Robert Boehne <rboehne@gnu.org> * libtool.m4 (_LT_AC_TAGCONFIG): Add test around the macro that adds tags to the libtool script so that they won't run when not needed. * configure.ac: Set F77 to no when no Fortran compiler is found. 2003-03-16 Charles Wilson <cwilson@ece.gatech.edu> * ltmain.in (win32_libid): use $SED, not head. 2003-03-02 Alexandre Oliva <aoliva@redhat.com> * libtool.m4 (AC_PROG_LD): Use $CC instead of GCC. (_LT_AC_LANG_CXX_CONFIG): Preserve variables used by AC_PROG_LD, and reset them for a C++ environment. Use the with_gnu_ld setting from AC_PROG_LD. 2003-02-28 Ralph Schleicher <rs@nunatak.allgaeu.org> * ltmain.in: Only append a dot to the wrapper script when building on cygwin/MSYS (check for $build, not $host). 2003-02-27 Samuel Meder <meder@mcs.anl.gov> * libtool.m4 (ia64): Add support for Intel compiler (ecc) on IA64 Linux. 2003-02-27 Benjamin Reed <ranger@befunk.com> * THANKS: Added people who have submitted 3 or more patches to libtool to the THANKS file. * README: Added notes about the Darwin (MacOSX) support. 2003-02-25 Bob McElrath <bob+libtool@mcelrath.org> * libtool.m4 (AC_LIBTOOL_PROG_COMPILER_PIC): Add support for the Compaq C compiler for Alpha Linux. 2003-02-25 Benjamin Reed <ranger@befunk.com> * libtool.m4 (darwin): Disable hardcoding library paths to make relinking unnecessary. 2003-02-24 Robert Boehne <rboehne@gnu.org> * libltdl/configure.ac: Use AC_CONFIG_AUX_DIR([.]) to place auxilary files in the libltdl directory. * Makefile.am: Add to the ltmain.sh rule to copy it into the libltdl subdirectory. * bootstrap: Explicitly handle ltmain.sh in libltdl, and pass --copy to automake. 2003-02-24 Ralph Schleicher <rs@nunatak.allgaeu.org> * libtool.m4 (AC_LIBTOOL_SETUP): Check for ar. 2003-02-23 Peter O'Gorman <peter@pogma.com> * libtool.m4 (darwin): Revamp darwin platform support. * ltdl.m4 (darwin): Support dlcompat if found. * ltmain.in: Make sure ranlib is run if needed when piecewise linking. 2003-02-23 Alexandre Duret-Lutz <adl@gnu.org> * ltmain.in (--help): Show mailing-address for bug reports. (--version): Mention only the most recent copyright year. * libtoolize.in (--help): Show mailing-address for bug reports. (--version): Mention only the most recent copyright year. 2003-02-19 Alexandre Oliva <aoliva@redhat.com> * libtool.m4 (AC_PROG_LD): Use $CC instead of GCC. (_LT_AC_LANG_CXX_CONFIG): Preserve variables used by AC_PROG_LD, and reset them for a C++ environment. Use the with_gnu_ld setting from AC_PROG_LD. * libtool.m4: Replace $linker_flags with $compiler_flags wherever it is used as argument to $CC. * libtool.m4: Use linux version_type on IRIX with GNU ld. Prefix -soname, -set_version and their arguments with ${wl}. Add -melf* linker scripts to LD, and use them to determine libsuff, shlibsuff and libmagic. 2003-02-17 Allan Sandfeld Jensen <snowwolf@one2one-networks.com> * libtool.m4: Intel icc fixups for version 7.0. 2003-02-17 Ralph Schleicher <rs@nunatak.allgaeu.org> * libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Prepend a dot to the value of the shrext (aka shared_ext) variable and delete it from the library_names_spec and soname_spec definitions. That way the user can omit the shared library suffix by setting it to the empty string. (AC_LIBTOOL_LANG_CXX_CONFIG): Strengthen renaming commands for the KCC compiler. * doc/libtool.texi (Link mode): Update the manual. 2003-02-17 Charles Wilson <cwilson@ece.gatech.edu> * ltmain.in (win32_libid): Rewritten to improve speed. 2003-02-11 Richard Dawe <rich@phekda.freeserve.co.uk> * libtoolize.in: Use the program found by AC_PROG_LN_S to create symlinks. 2003-02-08 Jan Kratochvil <project-libtool@jankratochvil.net> * ltmain.in: Handle duplicate object file names when performing piecewise archive linking by renaming object files when needed. 2003-02-05 Robert Boehne <rboehne@gnu.org> * libtool.m4 (AC_CHECK_LIBM): Search for a real symbol in the math library rather than 'main', it causes problems for C++ compilers with certain Auto* tools. (AC_LIBLTDL_INSTALLABLE): ditto. 2003-02-05 Christian Cornelssen <ccorn@cs.tu-berlin.de> * libtool.m4 (_LT_AC_LANG_CXX_CONFIG) (AC_LIBTOOL_PROG_LD_SHLIBS): Rewrite printf commands so that the format string cannot be mistaken as an option. Reported by Martin MOKREJS. 2003-02-05 Robert Boehne <rboehne@gnu.org> * libtool.m4: Modify the sys_lib_search_path_spec to allow for either native sed or GNU sed to be used. 2003-02-04 Nick Hudson <skrll@netbsd.org> * libtool.m4: don't use -nodefaultlibs in archive_commands or archive_expsym_commands on NetBSD. 2003-02-04 Albert Chin-A-Young <china@thewrittenword.com> * libtool.m4: Change setting of archive_cmds_need_lc so that it doesn't overwrite the previous setting. 2003-01-28 Albert Chin-A-Young <china@thewrittenword.com> * libtool.m4: Allow compiler variable, CC, CXX, etc. to be a program name with arguments. Original version stripped arguments for CC. 2003-01-28 Charles Wilson <cwilson@ece.gatech.edu> * ltmain.in: add code for a binary wrapper to use with uninstalled executables on cygwin/mingw. Make sure that --mode=clean gets shell wrapper and binary wrapper. When sourcing the shell wrapper, invoke using a terminal `.' on cygwin/mingw to avoid the automatic append-.exe behavior. 2003-01-28 Albert Chin-A-Young <china@thewrittenword.com> * libtool.m4: Hardcode library paths into libraries on IRIX. 2003-01-18 Robert Boehne <rboehne@gnu.org> * libtool.m4 (AC_LIBTOOL_PROG_COMPILER_PIC): Don't add -DPIC for languages other than C and C++. 2003-01-13 Albert Chin-A-Young <china@thewrittenword.com> * libtool.m4, ltmain.in: Add support for hppa*64* based on a patch by Ross Alexander <ross.alexander@uk.neceur.com>. Credit to Ross! Use +b to hardcode library runtime path. Add new variable, $hardcode_libdir_flag_spec_ld, that is equivalent to $hardcode_libdir_flag_spec but is used when ld is used for linking. This works around having to set wl=''. 2003-01-12 Robert Boehne <rboehne@gnu.org> * libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Revert an accidental rearranging of dylib and so for darwin. 2003-01-10 Robert Boehne <rboehne@gnu.org> * libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Modify the "-shrext" option so that is works properly under Darwin. Modify the processing of 'gcc -print-search-dirs' under Darwin to make it behave like GNU gcc does. (AC_LIBTOOL_CONFIG): Single quote $shrext. * ltimain.in: Expand shared_ext just before it is used so that it can be conditional on the value of $module. Continued in ChangeLog.2002 -- Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. This file is part of GNU Libtool. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. This file is offered as-is, without warranty of any kind.